Corona treatment system is a very effective way to increase the surface tension of virtually any material. Surface treatment is required for plastic films/fabrics whose normal surface tension is not sufficiently high to permit good wetting by flexo graphic inks.
Corona treatment system increases the surface tension of the fabrics respective to inks by inducing molecular changes in the surface of the films. This is done by exposing the air at the material's surface to a high-voltage electrical discharge - a corona. Corona discharge treatment at atmospheric pressure for improving adhesion of various polymer substrate is now standard practice.
Our product range are Bare Roller Treater (for Aluminum Foil / conductive films Corona Treatment with Ceramic Electrodes), Narrow Web Treaters, Corona Treater Machine and Corona Treater Systems for Blown Film Extrusion Plants for Monolayer and High Speed Multilayer plants, On-Line Corona Treater for Rotogravure / Flexo-printing machines, Woven Sack Roll Printing, and serving different industries
Treat width capacity : 4" to 48" webs. |
Treater roll : 2" / 3" / 4" diameter. |
Idler roll : 2" / 3" diameter. |
Maximum line speed : 6 to 60 meter per minute. |
Treat capability : One or two sides. |
Mains supply : 230 V, AC - 5 %,1 -. |
Mains frequency : 50 Hz - 5 % |
Output frequency : 15 to 25 Khz. |
App. Output power : 1 / 1.5 / 2 Kw. |
Electrodes : Multisegment / Multiblade. |