ISO 9001 : 2008 CERTIFIED

  • Sitemap
  • Contact Us

Air Shaft Manufacturer

Our Air Pneumatic Shaft For Winding Rewinding Machine is used for all types of Laminates like, Foil, Paper, LDPE, HDPE, PVC, etc. Our Air Pneumatic Shaft For Winding Rewinding Machine is manufactured with us most precision which ensure zero maintenance up to 10 years.

Air Pneumatic Shaft

Mechanical Shaft Manufacturer


Duplex shaft winder(centre winding type):

It is capable of compensating speed variation due to gauge variation with multi cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.


MECHANICAL SHAFT (BLADDER LESS SHAFT):

This is a lug type shaft but core holding is initiated mechanically and not pneumatically. This shaft mainly consists of slotted pipe, steel lugs, brass cam, ratchet etc.
The shaft is capable of taking any challenge arising out of heavy load and speed. It is possible only because of positive gripping and core centering achieved without any extra efforts with the help of cam/lug design. It is very much advantageous with cores having uneven inside diameter. Key and alien-cap bolt prevent any shearing of journals – pipe assembly.


Sizes:

Suitable for Core ID. 3″ and 6″
Length as per requirement


Capabilities:
Load up to 2 tons.
Suitable for Core l.D. dia 3”, 4”, 6”, 8” (metric size and special sizes also produced).
Length as required.
Speed up to 1000 mtrs/min.
Suitable for core materials: Paper, Steel, Thermoplastics.
Minimum core width 20 mm.
General Materials of Construction:
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
Send Inquiry
Name
Email
Mobile
Address
 
Message